Mechanical Tests
All testing required by ASTM A270/A1016 is performed. In addition, flare, flatten, flange, and reverse bend tests are performed. Surface roughness is measured per ASME/ANSI B46.1 requirements. These measurements are derived from four (4) readings taken at cross sections approximately 90 degrees apart.
Sizes
Diameter: ½” (12.70mm) – 12” (304.8mm)
Thickness
½” (12.70mm) – 3” (76.20mm) = 16 gauge = 0.065” (1.65mm)
4” (101.6mm) = 14 gauge = 0.083” (2.11mm)
6” (152.4mm) – 12” (304.8mm) = 12 gauge = 0.109” (2.77mm)
Surfaces Finishes
Sanitary A270 (3A) TPV Certified: Bright Annealed, ID-only, OD-only, ID & OD. All mechanical polished tubes meet or exceed A270, 3A, A270-S2.
Packaging
All material is end capped and poly sleeved. Tubes are packaged in tri-wall cardboard boxes with wood ends.
Only Available in 20' Lengths
ASTM Chemical Composition Requirements (Max.)
